IJFTET
International Journal of Futuristic Trends in Engineering and Technology
UGC and ISSN Approved and added in the UGC Approved List of Journals Journal.
IJFTET Volume I, Issue X, November - 2014
(Paper id: 10ET3011201401)
Enhancement in Construction Project by Material Management: A Literature Survey
Document Information:
Title: Enhancement in Construction Project by Material Management: A Literature Survey
Author(s): Karm P. Balar, P.G. student, At S.N.P.I.T. & R.C, UMRAKH-BARDOLI, Balarkarm@Gmail.Com, Paresh S. mistri, P.G. student, At S.N.P.I.T. & R.C, UMRAKH-BARDOLI, Hariom_paresh@yahoo.com, Prof. Rushabh A. shah, Asst. Professor, At S.N.P.I.T. & R.C, UMRAKH-BARDOLI, Rushshah307@gmail.com, Dr. jayesh shah, Principal, At S.N.P.I.T. & R.C, UMRAKH-BARDOLI, Vbtp_jayesh@yahoo.co.in
Citation: Karm P. Balar, Paresh S. mistri,Prof. Rushabh A. shah, Dr. jayesh shah. "Enhancement in Construction Project by Material Management: A Literature Survey", IJFTET, Volume: I , Issue: X Publication Year: 2014 , Page(s): 1-3
Keywords: cost overrun, time overrun, material management.
Article type: Research paper
DOI: 30/08/2014 http://ijftet.wix.com/research#!vol-i-issue-viii-sep14/c20mt (Permanent URL)
Publisher:Akshar Publication
Abstract: In this paper the original approach to the enhancement in construction project by the implementation of allied factor of material management are to be perform to evaluate the effect on cost overrun (COR) and time over run (TOR). The main focus of studying this topic is to identify the major parameter which are reasonable for occurring TOR & COR. Hence this study is planned to develop a approach for need of material management and causes of wastage of material with help of relevant method which will help to management to understand the problem. The main purpose for prepare this study is to identify the factor affecting for the wastage of material, also reason for avoiding the MM for project and to identify their effect on complatetion time of project and cost factor of project.
(Paper id: 10ET3011201402)
Synthesis of Substituted Quinazolones and its IR/NMR Characterization & Antimicrobial Activity
Document Information:
Title: Synthesis of Substituted Quinazolones and its IR/NMR Characterization & Antimicrobial Activity
Author(s): Hiral S. Tailor, Asst. Professor, Gujarat Technological University, Ahmedabad, Gujarat, Umrakh-Bardoli, hstailor@rediffmail.com
Citation: Hiral S. Tailor. "Synthesis of Substituted Quinazolones and its IR/NMR Characterization & Antimicrobial Activity", IJFTET, Volume: I , Issue: X Publication Year: 2014 , Page(s): 4-6
Keywords: Quinazolone
Article type: Research paper
DOI: 30/08/2014 http://ijftet.wix.com/research#!vol-i-issue-viii-sep14/c20mt (Permanent URL)
Publisher:Akshar Publication
Abstract: A large number of alkaloids, drugs, antibiotics, agrochemicals, and antimicrobial agents contains the quinazolone nucleus. They are essential component of very important naturally occurring substances (i.e. nucleic acids). The final product 6-Bromo-2-phenyl-3-[4-(3-substitutedphenyl-acryloyl)-phenyl]-3H-quinazolin-4-one is obtained from the starting reagent 2-amino benzoic acid via 4 step synthesis. All the compounds have characterized by IR & NMR spectra and elemental analysis.
(Paper id: 10ET3011201403)
Optimization of Static Characteristic of Lathe Bed
Document Information:
Title: Optimization of Static Characteristic of Lathe Bed
Author(s): Jignesh D. Patel, P.G. Student, VGI (FOE & FOM), Gujarat Tehnological University, jrsdi143mpy@gmail.com, Antriksh Bhatt, Asst. Prof. , Mechanical Department, VGI (FOE & FOM), Gujarat Tehnological University, antrikshvb@gmail.com
Citation: Jignesh D. Patel, Antriksh Bhatt. "Optimization of Static Characteristic of Lathe Bed", IJFTET, Volume: I , Issue: X Publication Year: 2014 , Page(s): 7-9
Keywords: lathe bed, optimal design, static.
Article type: Research paper
DOI: 30/08/2014 http://ijftet.wix.com/research#!vol-i-issue-viii-sep14/c20mt (Permanent URL)
Publisher:Akshar Publication
Abstract: Components like headstock, tailstock and carriage are should be in alignment for lathe operation which are hold on lathe bed. hence lathe bed is the most important part to optimize accuracy of work-piece & performance of lathe. The optimization of a lathe-bed is hence an important issue in machine tool design. In this thesis, we used Pro-E 5.0 to generate three-dimensional model and further it will analysed by using ANSYS 14.5 for the optimization design of lathe-bed. The final modal analysis shows that the presented optimal design is feasible and can produce a better structural performance.
(Paper id: 10ET3011201404)
A Review on CART Algorithm for the Prediction of Diabetes
Document Information:
Title: A Review on CART Algorithm for the Prediction of Diabetes
Author(s): Jimesh Rana, M.E Student, Computer Engineering, IIET, Dharmaj, India, Gujarat Technological University, er.jimesh@gmail.com,
Sanjay Patel, Asst. Prof, Computer Engineering, IIET, Dharmaj, India, Gujarat Technological University, Sanjaypatel.bece@gmail.com
Citation: Jimesh Rana, Sanjay Patel. "A Review on CART Algorithm for the Prediction of Diabetes", IJFTET, Volume: I , Issue: X Publication Year: 2014 , Page(s): 10-12
Keywords: CART Decision Tree, MATLAB, Data Mining, Diabetes, WEKA.
Article type: Research paper
DOI: 30/08/2014 http://ijftet.wix.com/research#!vol-i-issue-viii-sep14/c20mt (Permanent URL)
Publisher:Akshar Publication
Abstract: This Survey paper deals with efficient data mining technique of prediction for the diabetes from medical constituting a piece of evidence about the past records of patients. diabetes is a very common disease today’s in all age groups. due to diabetes heart disease, nerve damage, increases the risks of developing kidney disease, eye disease and a leading cause of blindness in adults. so mining the diabetes data in well organized manner is a criticizing problem. The CART classifier can be used to expand the perfection rate of the data mining approach. The data mining tool weka can be applied as an Api of matlab for producing the CART classifiers.
(Paper id: 10ET3011201405)
Document Information:
Title: A Review on Prevention and Detection the Financial Fraud Statement in Government Sector using the Data Mining Framework
Author(s): Harshil Gandhi, P.G. student, Computer Engineering, IIET, Dharmaj, Gujarat, India, g.harshil@yahoo.in, Pragnesh Patel, Asst. Prof., Computer Engineering, IIET, Dharmaj, Gujarat,India, pra2690@gmail.com
Citation: Harshil Gandhi, Pragnesh Patel. "A Review on Prevention and Detection the Financial Fraud Statement in Government Sector using the Data Mining Framework", IJFTET, Volume: I , Issue: X Publication Year: 2014 , Page(s): 13-17
Keywords: smart metering, Data privacy, Distribution water/electricity.
Article type: Research paper
DOI: 30/08/2014 http://ijftet.wix.com/research#!vol-i-issue-viii-sep14/c20mt (Permanent URL)
Publisher:Akshar Publication
Abstract: Many data mining techniques are developing for detecting the financial fraud [7]. Because when the internal auditing system is fail in the large organization or even in the government sector or in public sector then the chances of the fraud are increases. Data mining techniques are providing the best aid in fraud when missing some important data. This paper present comprehensive review of the literature on the Application of data mining techniques for the detection of financial fraud and proposes a framework for data mining techniques based smart meter fraud detection. The different classification techniques like NaïveBayes, decisiontrees and support vector machines are used to detect the financial fraud. The adoption of smart meters may bring new fraud detection concerns to the general public. Given the fact that metering data of individual homes/factories is accumulated every 15 minutes, it is possible to infer the pattern of electricity consumption of individual users. In order to protect the fraud detection of users in a completely de-centralized setting (i.e., individuals do not communicate with one another. The novel approach allows individual meters to report the true electricity consumption reading with a pre-determined probability. Load serving entities (LSE) can reconstruct the total electricity consumption of a region or a district through inference algorithm, but their ability of identifying individual users’ energy consumption pattern is significantly reduced. Using simulated data, we verify the feasibility of the proposed method and demonstrate performance advantages over existing approaches
(Paper id: 10ET3011201406)
Application of Fused Deposition Modeling Rapid Prototyping Technology Using Advance Materials
Document Information:
Title: Application of Fused Deposition Modeling Rapid Prototyping Technology Using Advance Materials
Author(s): Prof. D. M. Joshipura, Asst. Prof., Mechanical Engineering, Sanjaybhai Rajguru college of engineering,, Rajkot. Gujarat. India., dmjoshipura@gmail.com, Prof. Mitech A. Popat, Associate Professor & Principal, Sanjaybhairajguru college of engineering,, Rajkot. Gujarat. India.
Citation: Prof. D. M. Joshipura, Prof. Mitech A. Popat. "Application of Fused Deposition Modeling Rapid Prototyping Technology Using Advance Materials", IJFTET, Volume: I , Issue: X Publication Year: 2014 , Page(s): 18-22
Keywords: Fused Deposition modeling, advance materials, rapid prototyping technology.
Article type: Research paper
DOI: 30/08/2014 http://ijftet.wix.com/research#!vol-i-issue-viii-sep14/c20mt (Permanent URL)
Publisher:Akshar Publication
Abstract: Nowadays basic and advanced materials have been utilized for insight of products by Fused Deposition Modeling Rapid Prototyping technology application. Rapid Prototyping (RPT) technology has been highly developed to formulate initial prototypes from a range of materials. Fused Deposition Modeling (FDM) is one of the emblematic RPT processes that give efficient prototypes of Acrylonitrile Butadiene Styrene (ABS), polyamide, polycarbonate, polyethylene, and polypropylene. In this paper, basic information of basic and recent materials used for insight of products by FDM-RPT application is presented. The detail analysis is presented to make effective FDM using different advanced material.
(Paper id: 10ET3011201407)
Study on various Page Ranking Algorithms in Web Mining
Document Information:
Title: Study on various Page Ranking Algorithms in Web Mining
Author(s): Abha Joshi, Student of Master of Computer Engineering, HGEC Vahelal, abha.joshi1912@gmail.com
Citation:Abha Joshi. "Study on various Page Ranking Algorithms in Web Mining", IJFTET, Volume: I , Issue: X Publication Year: 2014 , Page(s): 23-25
Keywords: Fused Deposition modeling, advance materials, rapid prototyping technology.
Article type: Research paper
DOI: 30/08/2014 http://ijftet.wix.com/research#!vol-i-issue-viii-sep14/c20mt (Permanent URL)
Publisher:Akshar Publication
Abstract: Nowadays basic and advanced materials have been utilized for insight of products by Fused Deposition Modeling Rapid Prototyping technology application. Rapid Prototyping (RPT) technology has been highly developed to formulate initial prototypes from a range of materials. Fused Deposition Modeling (FDM) is one of the emblematic RPT processes that give efficient prototypes of Acrylonitrile Butadiene Styrene (ABS), polyamide, polycarbonate, polyethylene, and polypropylene. In this paper, basic information of basic and recent materials used for insight of products by FDM-RPT application is presented. The detail analysis is presented to make effective FDM using different advanced material.
(Paper id: 10ET3011201408)
Document Information:
Title: Effect of Boundary Conditions on Dynamic Characteristics of Mechanical Structure using Finite Element Analysis
Author(s): Nigam V. Oza, Lecturer in Mechanical Engineering, Government Polytechnic, Vadnagar, Gujarat Technological University, nigam91@yahoo.com, Ravi D. Patel, Lecturer in Mechanical Engineering, Government Polytechnic, Vadnagar, Gujarat Technological University, raviengineer2007@gmail.com
Citation: Nigam V. Oza, Ravi D. Patel. "Effect of Boundary Conditions on Dynamic Characteristics of Mechanical Structure using Finite Element Analysis", IJFTET, Volume: I , Issue: X Publication Year: 2014 , Page(s): 26-28
Keywords: Finite Element Analysis (FEA); Frequency Response function (FRF); Modal analysis; Harmonic analysis; Natural frequency
Article type: Research paper
DOI: 30/08/2014 http://ijftet.wix.com/research#!vol-i-issue-viii-sep14/c20mt (Permanent URL)
Publisher:Akshar Publication
Abstract: Boundary conditions in mechanical structures and machining operation in machine tools play vital role in dynamic performance for vibration testing. Minor variation in boundary condition can change dynamic behavior of structures. Modifying boundary conditions, Finite Element Analysis can be validated for vibration testing results. Also better high speed machining can be obtained in machine tools. In this paper, Finite Element Analysis is carried out on crank type structure with different boundary conditions. Modal analysis is performed for modal natural frequency and mode shape. Harmonic analysis is carried out with un-damped condition to obtain Frequency response Functions (FRFs).These FRFs compared for change in modal frequencies, mode shapes and amplitudes.
(Paper id: 10ET3011201409)
Synthesis, Structural and Superconducting Properties of YBa2Cu3O7- δ High Tc Superconductor
Document Information:
Title: Synthesis, Structural and Superconducting Properties of YBa2Cu3O7- δ High Tc Superconductor
Author(s): Chirag J. Shah, Department of Mechanical Engineering, Government .Polytechnic, Ahmedabad-380015, Gujarat Technology University, Ahmedabad, chiragshah72@rediffmail.com, Hemin V. Thakkar, Department of Mechanical Engineering, Government .Polytechnic, Ahmedabad-380015
Gujarat Technology University, Ahmedabad, hemin2@in.com, Nisha C. Pandya, Department of Mechanical Engineering, Government .Polytechnic, Himatnagar-383001, Gujarat Technology University, Ahmedabad, nishacryo8@gmail.com
Citation: Chirag J. Shah, Hemin V. Thakkar, Nisha C. Pandya. "Synthesis, Structural and Superconducting Properties of YBa2Cu3O7- δ High Tc Superconductor", IJFTET, Volume: I , Issue: X Publication Year: 2014 , Page(s): 29-31
Keywords:High Temperature Super Conductor, X-ray Diffraction, Transition Temperature, Critical Current Density, Magnetic Susceptibility, etc.
Article type: Research paper
DOI: 30/08/2014 http://ijftet.wix.com/research#!vol-i-issue-viii-sep14/c20mt (Permanent URL)
Publisher:Akshar Publication
Abstract:The YBa2Cu3O7-δ type high temperature superconductor compounds have been synthesized and characterized by structural and superconducting properties. Four-probe resistivity confirmed the superconducting transition temperature of 92K.The X-ray diffraction patterns revealed single phase orthorhombic structure. As low as 20 Ω normal state resistance was observed suggesting strong intra-grain coupling. The effects of modified sample preparation on structural, surface and superconducting properties are presented.
(Paper id: 10ET30112014010)
Document Information:
Title: Solution of Porous Medium Equation Arising in Fluid Flow through Porous Media by Homotopy Perturbation Method Using Elzaki Transform
Author(s): Shraddha S. Chavan, Department of Applied Mathematics and Humanities, SardarVallabhbhai National Institute of Technology, Surat. Gujarat. India, shraddha.svnit@gmail.com, Mihir M. Panchal, Department of Applied Sciences and Humanities, C. G. Patel Institute of Technology, Bardoli, Gujarat. India, mihirpanchal45@gmail.com
Citation: Shraddha S. Chavan, Mihir M. Panchal. "Solution of Porous Medium Equation Arising in Fluid Flow through Porous Media by Homotopy Perturbation Method Using Elzaki Transform", IJFTET, Volume: I , Issue: X Publication Year: 2014 , Page(s): 32-35
Article type: Research paper
DOI: 30/08/2014 http://ijftet.wix.com/research#!vol-i-issue-viii-sep14/c20mt (Permanent URL)
Publisher:Akshar Publication
Abstract: In this Paper, We have discussed the Application of Homotopy Perturbation Method using Elzaki transform for finding Solution of Porous Medium Equation arising in fluid flow through porous media. In this paper we have discussed Ground water infiltration problem in Fluid Flow through Homogeneous Porous Media.
(Paper id: 10ET30112014011)
Study of Critical Intersection: A Case Study of Akhbarnagar Rotary in Ahmedabad
Document Information:
Title: Study of Critical Intersection: A Case Study of Akhbarnagar Rotary in Ahmedabad
Author(s): Jigar J. Patel, M.E.Student, Transportation Engg., G.E.C. Modasa, Gujarat, Prof. H. K. Dave, Associate Professor, Dept. of . Civil Engg., G.E.C. Modasa, Gujarat, Dr. V .M. Patel, Head of Department, Dept. of . Civil Engg., G.E.C. Modasa, Gujarat
Citation: Jigar J. Patel, Prof. H. K. Dave, Dr. V .M. Patel. "Study of Critical Intersection: A Case Study of Akhbarnagar Rotary in Ahmedabad", IJFTET, Volume: I , Issue: X Publication Year: 2014 , Page(s): 36-38
Keywords: Rotary, PCU, Peak Hour.
Article type: Research paper
DOI: 30/08/2014 http://ijftet.wix.com/research#!vol-i-issue-viii-sep14/c20mt (Permanent URL)
Publisher:Akshar Publication
Abstract: The developing cities are having lots of traffic problems with increasing rate of vehicles in today’s scenario. Ahmedabad is the highest populated city in Gujarat. Highest traffic problem occur at intersection. Intersection is an area shared by two or more roads. This area is designated for the vehicles to turn to different directions to reach their desired destinations. Its main function is to guide vehicles to their respective directions. Traffic intersections are complex locations on any highway. This is because vehicles moving in different direction wan to occupy same space at the same time. In addition, the pedestrians also seek same space for crossing. Drivers have to make split second decision at an intersection by considering his route, intersection geometry, speed and direction of other vehicles etc. A small error in judgment can cause severe accidents. It also causes delay and it depends on type, geometry, and type of control. Overall traffic flow depends on the performance of the intersections. It also affects the capacity of the road. Therefore, both from the accident perspective and the capacity perspective, the study of intersections very important for the traffic engineers especially in the case of urban scenario.So detail study of intersection is needed .
(Paper id: 10ET30112014012)
Finite Element Analysis of IC Engine with Varying Damping Estimates and Curve Fitting using RFPM
Document Information:
Title: Finite Element Analysis of IC Engine with Varying Damping Estimates and Curve Fitting using RFPM
Author(s): Nigam V. Oza, Lecturer in Mechanical Engineering, Government Polytechnic, Vadnagar, Gujarat Technological University, nigam91@yahoo.com, Rajesh A. Prajapati, Lecturer in Mechanical Engineering, R.C.T.I. ,Ahmedabd, Gujarat Technological University, raprajapati27@gmail.com
Citation: Nigam V. Oza, Rajesh A. Prajapati. "Finite Element Analysis of IC Engine with Varying Damping Estimates and Curve Fitting using RFPM", IJFTET, Volume: I , Issue: X Publication Year: 2014 , Page(s): 39-41
Keywords: Finite Element Analysis (FEA); FRF; Modal analysis; Rational Fraction Polynomials Method (RFPM); Modal parameter extraction;
Article type: Research paper
DOI: 30/08/2014 http://ijftet.wix.com/research#!vol-i-issue-viii-sep14/c20mt (Permanent URL)
Publisher:Akshar Publication
Abstract: In this paper concept of Modal and Harmonic analysis in FEA is discussed. FEA model of IC engine is generated and modal parameters (natural frequency, mode shapes) are extracted using modal analysis. Frequency Response Function (FRF) is obtained in harmonic analysis. Different damping estimates are considered to obtain these FRF. The effect of damping is discussed for these FRF. By this way, FEA model can be modelled to simulate real structures when performed on real vibration testing methods. And amplitude of FRF can be retarded by tuning different damping estimates. Rational Fraction Polynomial method is used to check the accuracy of FEA as Curve fitting technique.
(Paper id: 10ET30112014013)
Evaluation of Factor Affecting For Supply Chain in Construction Project
Document Information:
Title: Evaluation of Factor Affecting For Supply Chain in Construction Project
Author(s): Rajen B. Mistry, Student of final year M.E), Construction Management, S.N.P.I.T & R.C, Umrakh, rajanbmistry@yahoo.com, Vishal R. Gajera, Student of final year M.E, Construction Management, S.N.P.I.T & R.C, Umrakh, vishal_gajera123@yahoo.com, Hiren A. Rathod, Assistant professor, Civil engineering department, S.N.P.I.T & R.C, Umrakh, h.rathod024@gmail.com
Citation: Rajen B. Mistry, Vishal R. Gajera, Hiren A. Rathod. "Evaluation of Factor Affecting For Supply Chain in Construction Project", IJFTET, Volume: I , Issue: X Publication Year: 2014 , Page(s): 42-45
Keywords: Important index, supply chain, stake holders
Article type: Research paper
DOI: 30/08/2014 http://ijftet.wix.com/research#!vol-i-issue-viii-sep14/c20mt (Permanent URL)
Publisher:Akshar Publication
Abstract: The planning and management of supply chains require properly specifying the participating members and the relationships among them. Construction supply chains usually consist of numerous participants and are complex in structure.The main objective of this study is to find critical factors affecting supply chain. A survey was carried out in south Gujarat region, and feedbacks were taken from architects, contractors, consultants, site engineers, retailers, distributors and developers. Total 38 factor identified from the literature review. Total 148 feedbacks were analyzed through the Important Index (IMPI) technique. Five most crucial factors in descending orderto IMPI Technique are Alignment b/w partners in the supply chain, Late deliveries, Complexity management/ rationalization, Long variable lead times, Alignment b/w internal business function. Contractors shall act on these factors to improve material supply chain in construction projects.
(Paper id: 10ET30112014014)
Experimental Analysis for Compressive Strength of Concrete Containing Guar Gum and Super-Plasticizer
Document Information:
Title: Experimental Analysis for Compressive Strength of Concrete Containing Guar Gum and Super-Plasticizer
Author(s): Jaymesh D. Prajapati, Research Scholar at Master of Engineering (CASAD), SAL Institute of Technology & Engineering Research.
Gujarat Technological University, Jaymesh.pra3017@gmail.com. Prof. Satyen Ramani, Professor at SAL Institute of Technology & Engineering Research (Applied Mechanics Department). Gujarat Technological University. satyen.civilengg@gmail.com.
Citation: Jaymesh D. Prajapati & Prof. Satyen Ramani. "Experimental Analysis for Compressive Strength of Concrete Containing Guar Gum and Super-Plasticizer", IJFTET, Volume: I , Issue: X Publication Year: 2014 , Page(s): 46-49.
Keywords: Self-Compacting Concrete (SCC), Guar Gum (viscosity modifying agent), Super Plasticizer, Compressive Strength.
Article type: Research paper
DOI: 30/11/2014 http://ijftet.wix.com/research#!vol-i-issue-viii-sep14/c20mt (Permanent URL)
Publisher:Akshar Publication
Abstract: The use of Guar Gum (GG) as a viscosity modifying admixture (VMA) in stabilizing the rheological properties and consistency of Self-Compacting Concrete (SCC) was proven to be possible because of Guar Gum is a naturally available form of viscosity modifying agent. However, available commercial VMA’s are imported from abroad and are costly thus, making the over-all cost of SCC high. But in India production of Guar Gum is high and its cost is minor then other Viscosity modifying agents available in market. This paper presents investigations on the performance of a locally produced VMA (Guar Gum) used in combinations with commercially available High-Range Water Reducer or Super Plasticizer (HRWR or SP) to produce self compacting Concrete with regards to high flowability, elimination of segregation, filling ability of congested Spaces with obstacles and high compressive strength. In experiment Guar Gum is replaced with cement content and super plasticizer is replaced with content of water. A result shows comparison between compressive strength of normal Concrete and Concrete having Guar Gum and super plasticizer of different proportions.
(Paper id: 10ET30112014015)
Investigating Effect of Steel Fibreon Strength of Concrete - Future Research Needs
Document Information:
Title: Investigating Effect of Steel Fibreon Strength of Concrete - Future Research Needs
Author(s): Rishita A. Gajjar, M.E. Student, Civil Engineering Department, SAL Institute of Technology & Engineering Research, Ahmedabad, Gujarat, India. rishigajjar242@gmail.com. Prof. Satyen Ramani, Civil Engineering Department, SAL Institute of Technology & Engineering Research, Ahmedabad, Gujarat, India. satyen.civilengg@gmail.com.
Citation: Rishita A. Gajjar & Prof. Satyen Ramani. "Investigating Effect of Steel Fibreon Strength of Concrete - Future Research Needs", IJFTET, Volume: I , Issue: X Publication Year: 2014 , Page(s): 50-53.
Keywords: Steel fibre, Flexural Strength, Compressive strength, Tensile strength, Aspect ratio.
Article type: Research paper
DOI: 30/11/2014 http://ijftet.wix.com/research#!vol-i-issue-viii-sep14/c20mt (Permanent URL)
Publisher:Akshar Publication
Abstract: Fibres are generally used as resistance of cracking and strengthening of concrete. According to various research papers, it has been found that steel fibres give the maximum strength in comparison to glass and polypropylene fibres. Fibre reinforced concrete has been successfully used in slab, beam, shotcrete, footing, hydraulic structure, structures in seismic regions and many other applications. This review study is atrial of giving some highlights for use of steel fibres especially in new types of concrete.